Mazda MX-6 1998, Руководство по ремонту

Страница: 850 / 1282

AUTOMATIC TRANSAXLE [GF4A-EL]
AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
Warning
•
When the transaxle and ATF are hot, they
can badly burn. Turn off the engine and
wait until they are cool before changing
the ATF.
1. Remove the dipstick.
2. Remove the drain plug and washer.
3. Drain the ATF into a container.
4.
[GF4A-EL]
W 6 U 5 1 7 W 3 9
5. Add the specified amount and type of ATF through
the oil filler tube.
ATF type
M -III or equivalent (e.g. Dexron®II)
Capacity
8.0 L {8.5 US qt, 7.0 Imp qt}
6. Install the dipstick.
7. Verify the ATF level. (Refer to 0 5 -1 7B
AUTOMATIC TRANSAXLE FLUID (ATF)
INSPECTION [GF4A-EL], ATF Level Inspection.)
W 6 U 5 1 7 W C Z
Install a new washer and the drain plug.
Tightening torque
40— 53 N m {4.0— 5.5 kgf-m, 29— 39 ft lbf}
O/D OFF SWITCH INSPECTION [GF4A-EL]
Inspection of Operation
1. Turn the ignition switch from OFF to ON.
2. Verify that the O/D OFF indicator is not
illuminated. Depress the O/D OFF switch and
verify that the O/D OFF indicator light illuminates.
3. If not as specified, check the terminal voltage of
the O/D OFF switch.
Inspection of Voltage
1. Remove the front console. (Refer to 09-17
FRONT CONSOLE REMOVAL/INSTALLATION.)
2. Turn the ignition switch to ON.
3. Measure voltage at the O/D OFF switch connector
terminals.
Position
Connector terminal
A B
OFF (Normal)
(V)
B+ 0
ON (Depressed)
(V)
0
0
(V) : Voltage
W 6 U 5 1 7 W 1 7
4. If not as specified, check the continuity of the O/D
OFF switch.
Inspection of Continuity
1. Disconnect the negative battery cable.
2. Disconnect the O/D OFF switch connector.
3. Check continuity of the switch.
O O : Continuity
Position
Terminal
A B
OFF (Normal)
ON (Depressed)
O ------------ ------------ O
W6U517WF4
W 6 U 5 1 7 W D O
0 5 -1 7 B -1 0