Mazda MX-6 1998, Руководство по ремонту

Страница: 402 / 1282

TROUBLESHOOTING [CRUISE CONTROL SYSTEM]
STEP
INSPECTION
ACTION
8
*
Disconnect cruise actuator connector.
Set selector lever to N.
Inspect continuity between terminal I (selector
lever position signal) of cruise actuator
connector of wiring harness and ground.
Is there continuity?
Yes
Replace cruise actuator, then go to step 13.
No Go to next step.
9*
Inspect continuity between the following of
transaxle range switch connector of wiring
harness and ground.
• KL: H terminal
• FS: 9 terminal
Is there continuity?
Yes Repair wiring harness from cruise actuator to transaxle
range switch, then go to step 13.
No Go to next step.
W6U101WPV
10* Disconnect transaxle range switch.
Inspect continuity between the following of
transaxle range switch connector of wiring
harness and ground.
• KL: B terminal
• FS: 4 terminal
Is there continuity?
Yes Inspect transaxle range switch, then go to step 13.
No Inspect starter and wiring harness from starter to transaxle
range switch, then go to step 13.
W6U101WPW
11
Press cruise control main switch.
Does it cancel?
Yes The system is normal.
No Go to next step.
12 Inspect cruise control main switch.
c r 0 1 -2 0 CRUISE CONTROL SWITCH
INSPECTION
Is it okay?
Yes Replace cruise actuator, then go to next step.
No Replace cruise control main switch, then go to next step.
13
Cancel set speed while driving at set speed.
Does
it
work?
Yes
Troubleshooting completed.
No Reconfirm the symptoms. If the trouble persists, go back
to step 1.__________________________________________
0 1 -0 1 C -1 4