Mazda MX-6 1998, Руководство по ремонту

Страница: 1175 / 1282

SECURITY AND LOCKS
DOOR LOCK TIMER UNIT 2 REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install In the reverse order of removal.
1 C o n n e c to r
2 D o o r lo c k t im e r u n it 2
DOOR LOCK TIMER UNIT 1 INSPECTION
W 6 U 9 1 4 W 1 3
1. Measure the voltage at the door lock timer unit 1 terminals as indicated below.
2. Disconnect the door lock timer unit 1 connector before checking for continuity at terminal F.
3. If not as specified, inspect the parts listed under “ Inspection area” and the related wiring harnesses.
4. If the parts and wiring harnesses are okay but the system still does not work properly, replace the door lock
timer unit 1.
Terminal Voltage List (Reference)
G
___
c
E
71
c A
H F D B
W 6 U 9 14 W A C
Terminal Signal Connection
T e s t c o n d i t i o n
V o lt a g e ( V ) /
C o n t i n u i t y
I n s p e c t i o n a r e a
A — N o t u s e d — — —
D o o r lo c k s w itc h a t lo c k B + —> 0 -» B +
B
D o o r lo c k in p u t C P U
T r a n s m it te r lo c k b u tto n p r e s s e d B + —> 0 -> B + C P U
O th e r B +
C P o w e r s u p p ly
D .L O C K 3 0 A fu s e C o n s t a n t B + D .L O C K 3 0 A fu s e
D D o o r lo c k o u tp u t
D o o r lo c k a c tu a to r
D o o r lo c k a c tu a to r lo c k e d
O th e r
0 - > B + - >0
0
D o o r lo c k a c t u a t o r
W 6 U 9 1 4 W 1 2
W 6 U 9 1 4 W A B
0 9 -1 4 -7