Mazda MX-6 1998, Руководство по ремонту

Страница: 872 / 1282

AUTOMATIC TRANSAXLE SHIFT MECHANISM
SELECTOR LEVER ADJUSTMENT
W 6 U 5 1 8 W 0 3
1. Remove the front console. (Refer to 09-17 7. Connect the set button.
FRONT CONSOLE REMOVAL/INSTALLATION.) 8. Slide the lock cover to lock the set button.
2. Shift the selector lever to P position (KL), or D
range (FS).
3. Remove the indicator screws and lift up the
indicator panel.
4. Slide the lock cover.
5. Disconnect the set button.
6. Shift the selector lever to P position (KL), or D
range (FS).
9. Install and adjust the indicator panel. (Refer to
05-18 SELECTOR LEVER
DISASSEMBLY/ASSEMBLY.)
10. Install the front console. (Refer to 09-17 FRONT
CONSOLE REMOVAL/INSTALLATION.)
11. Verify correct operation of the selector lever.
(Refer to 05-18 SELECTOR LEVER
INSPECTION.)
HEAVY GAUGE WIRE
W 6 U 5 1 8 W A 6
5. Remove the heavy gauge wire.
6. Verify that the selector lever properly aligns with
the indicator in each range.
W 6 U 5 1 8 W 0 4
Tightening torque
2.0— 2.9 N m (20— 30 kgf cm, 18— 26 in-lbf}
INDICATOR PANEL ADJUSTMENT
1. Loosen the indicator panel screws.
2. Shift the selector lever to P position.
3. Align the alignment screws in the slider with the
holes in the indicator panel. Install heavy-gauge
wire to hold the slider.
W 6 U 5 1 8 W A 5
4. Tighten the indicator panel screws in the order
shown In the figure.
W 6 U 5 1 8 W A 3
LO C K C O V E R
W 6 U 5 1 8 W A 4
0 5 -1 8 -2