Mazda MX-6 1998, Руководство по ремонту

Страница: 963 / 1282

TROUBLESHOOTING [AIR BAG SYSTEM]
STEP INSPECTION
ACTION
Is short bar between terminal Q of SAS unit
(21-pin) and terminal S of SAS unit (21-pin)
damaged?
W 6 U 8 0 1 W A R
Yes Replace dash harness, then go to step 6.
No Go to next step.
Is hook that activates SAS unit connector
short bar okay?
SAS UNIT
Yes Go to next step.
No Replace SAS unit, then go to step 6.
t r 0 8-10 SAS UNIT REMOVAL/INSTALLATION
HOOK
W 6 U 8 0 1 W A S
5*
Disconnect SAS unit connector (21-pin) and
instrument cluster connector (12-pin).
Insert insulative material between terminals Q
and S of SAS unit connector (21-pin) so short
bar cannot operate.
Check for continuity between terminal Q at
SAS unit connector (21-pin) of wiring harness
and ground.
Is there continuity?
Yes Replace or repair wiring harness between instrument
cluster and SAS unit, then go to next step.
No Replace SAS unit, then go to next step.
d
- 0 8-10 SAS UNIT REMOVAL/INSTALLATION
V Y
W 6 U 8 0 1 W A T
Connect SAS unit connector.
Connect instrument cluster connector.
Connect negative battery cable.
When turning ignition switch to ON, does air
bag system warning light operate properly?
Yes
Troubleshooting completed.
No Reconfirm symptoms of malfunction.
0 8 -0 1 A - 1 3