Mazda MX-6 1998, Руководство по ремонту, Страница: 802 / 1282

MANUAL TRANSAXLE
12 Drive shaft
c r 0 3 -1 3 DRIVE SHAFT
REMOVAL/INSTALLATION
13 Joint shaft
c r 0 3 -1 3 JOINT SHAFT
REMOVAL/INSTALLATION
14 Engine mount member
tr Removal Note
e f
Installation Note
15 No.2 engine mount
tr
Installation Note
16
No.4 engine mount rubber
e t
01-1 OB ENGINE REMOVAL/INSTALLATION
[KL], No.3, No.4 Engine Mount Rubber
Installation Note
17 Under cover
18 No.1 engine mount bracket
19
Transaxle
tr Removal Note
ir Installation Note
20 No.5 engine mount
Engine Mount Member Removal Note
Caution
• To prevent damage to the body, insert a
rag into the gap between the fender and
body, when installing the SST.
1. Support the engine by using the SST before
removing the engine mount member.
2. Remove the engine mount member.
Transaxle Removal Note
1. Loosen the SST (49 G017 5A0) and lean the
engine toward the transaxle.
2. Support the transaxle on a jack.
3. Remove the transaxle mounting bolts.
4. Remove the transaxle.
Transaxle Installation Note
1. Set the transaxle on a jack and lift into place.
2. Install the transaxle mounting bolts.
No.2 Engine Mount, Engine Mount Member
Installation Note
1. Position the direction indicator on engine mount
member bushings facing toward the front side,
and install the bushings onto the engine mount
member.
2. To install the engine mount member, put the No.2
engine mount stud bolts through the engine mount
member installation holes.
3. Install the engine mount member bolts A and nuts
A.
Tightening torque
A: 67— 93 N m {6.8— 9.5 kg fm , 50—68 ft-lbf}
4. Loosely tighten the No.2 engine mount nuts B.
5. Remove the SST (49 G017 5A0).
6. Tighten the No.2 engine mount nuts B.
Tightening torque
B: 75— 104 N m
{7.6— 10.7
kgf
m, 55— 77
ft-lbf}
0 5 -1 5 -6