Mazda MX-6 1998, Руководство по ремонту

Страница: 430 / 1282

MECHANICAL [KL]
4. With the No.1 idler pulley removed, install the
timing belt on the pulleys in the order shown
below.
(1) Timing belt pulley
(2) No.2 idler pulley
(3) Camshaft pulley (LH)
(4) Tensioner pulley
(5) Camshaft pulley (RH)
5. Verify that there is tension between pulleys (3)
and (1), and between pulleys (1) and (5).
W 6 U 1 1 0 W C K
Caution
• Verify that the belt has no looseness at the
tension side.
• Do not damage the bolt threads when
installing.
6. Install the No.1 idler while applying the pressure
on the timing belt.
No.1 IDLER
W 6 U 1 1 0 W C L
7. Push the auto tensioner in the direction of the
arrow and hand tighten the lower bolt. Tighten the
bolts.
W 6 U 1 1 0 W C R
W6LH10WCM
8. Remove the pin from the auto tensioner to apply
tension to the belt.
W 6 U 1 1 0 W C P
W6U110WCN
9. Turn the crankshaft clockwise twice, and align the
timing marks.
10. Verify that all timing marks are correctly aligned. If
not, remove the timing belt and repeat from
Timing Belt Auto Tensioner Installation Note.
Crankshaft Pulley Installation Note
• Hold the crankshaft by using the SST.
0 1 -1 OB-9