Mazda MX-6 1998, Руководство по ремонту

Страница: 209 / 1282

TROUBLESHOOTING [ENGINE CONTROL KL]
Reading DTCs procedure
Note
• Start engine and bring up to operating
temperature before running OBD Test.
1. Perform the necessary vehicle preparation and
visual inspection. Hook-up the SST (NGS tester)
to the vehicle.
1998 - V IN
tt
10: W
1997 - VIN # 10: V
1996 - VIN # 10: T
1995 - VIN # 10: S
1994 - VIN # 10: R
SELEC T ITEM AND PRESS TRIGGER TO START
W 6 U 1 0 1 W K 3
2. Move the cursor to VEHICLE AND ENGINE
SELECTION.
7. Move the cursor to DIAGNOSTIC DATA LINK in
the main menu screen. Press the trigger key to
enter into menu system diagnostics.
V F H I C L E A N D E N G I N E S E I F C T I O N
DIAGNOSTIC DATA LINK
VIEW RECORDER AREAS
DIGITAL MEASUREMENT SYSTEM
I GENERIC OBD H FUNCTIONS
SELECT ITEM AMO PRESS TRIGGER TO START
W6U101WK4
8. Move the cursor to PCM. Press the trigger.
W 6 U 1 0 1 W K 1
3. Move the cursor to SELECT NEW VEHICLE
YEAR & MODEL. Press the trigger key to enter
this selection.
POWERTRAIN CONTROL MODULE
ABS - ANTILOCK BRAKE SYSTEM
SELECT ITEM AND PRESS TRIGGER TO START
W 6 U 1 0 1 W K 5
[NO VE HIÇ LE S E L EÇTED
D E S E L E C T C U R R E N T :/C
j
EL '
9. Move the cursor to DIAGNOSTIC TEST MODE.
Press the trigger key to enter this selection.
SELECT ITEM AND PRESS TRIGGER TO START
W 6 U 1 0 1 W K 2
4. Move the cursor to 1998 — VIN #10:W. Press the
trigger key enter this selection.
5. Move the cursor to appropriate model. Press the
trigger key enter this selection.
6. The vehicle selection screen showing the selected
vehicle will be displayed. Move the cursor to the
vehicle selected. Press the trigger key.
D IA G N O S T IC T E S T M O D E S
PID/DATA MONITOR AND RECORD
ACTIVE COMMAND MODES
DIAGNOSTIC TROUBLE CODE LIBRARY
SELECT ITEM AJiO PRESS TRIGGER TO START
W 6 U 1 0 1 W K 6
10. Move the cursor to appropriate mode. Press the
trigger key to enter this selection.
11. Retrieve DTCs as follows:
(1) Continuous DTCs
(2) KOEO DTCs
(3) KOER DTCs
0 1 -0 1 B -3