Mazda MX-6 1998, Руководство по ремонту

Страница: 958 / 1282

TROUBLESHOOTING [AIR BAG SYSTEM]
DTC 7
Passenger-side air bag module
DETECTION
CONDITION
Resistance detected between terminals l- K of SAS unit is other than 2 £2.
POSSIBLE
CAUSE
Passenger-side air bag module malfunction
Malfunction in wiring harness between SAS unit and passenger-side air bag module
STEP INSPECTION ACTION
Warning
• Handling the air bag module and SAS unit
improperly can accidently deploy the air
bag modules which may cause serious
injury. Read AIR BAG SYSTEM SERVICE
WARNINGS, before handling the air bag
module and SAS unit.
tr 0 8 -1 0 AIR BAG SYSTEM SERVICE
WARNINGS
Turn ignition switch to LOCK.
Disconnect negative battery cable and wait for
more than 1 minute to allow backup power
supply of SAS unit to deplete its stored power.
Remove glove compartment.
Disconnect passenger-side air bag module
connector.
Is passenger-side air bag module connector pin
okay?
W 6 U 8 0 1 W A E
Yes Go to next step.
No Replace wiring harness.
Connect leads of SST (Fuel And Thermometer
checker) to terminals A and B of the
passenger-side air bag module connector.
Set resistance of
SST (Fuel And Thermometer
checker) to 2 ohms.
Connect negative battery cable.
Is DTC 7 indicated when ignition switch is turned
to ON?
Yes Go to next step.
No Replace passenger-side air bag module.
c r 0 8 -1 0 PASSENGER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION
0 8 -0 1 A -8