Mazda MX-6 1998, Руководство по ремонту

Страница: 976 / 1282

AIR BAG SYSTEM
Passenger-side air bag module
1. Remove the passenger-side air bag module.
(Refer to 0 8 -1 0 PASSENGER-SIDE AIR BAG
MODULE REMOVAL/INSTALLATION.)
2. Install the bolts to the passenger-side air bag
module.
Warning
•
If the air bag module is not properly
installed to the tire wheel, serious injury
may occur when the module is deployed.
When installing the air bag module to the
tire wheel, make sure the front of the
module is facing up.
3. Tie the air bag module to the tire wheel with the
front of the module facing up. Wrap the wire
through the wheel and around the air bag module
bolt at least four times.
W 6 U 8 1 0 W A V
4. Connect the SST (Harness Adapter) to the
passenger-side air bag module as shown.
5. Stack the tire with the passenger-side air bag
module on top of two tires. Stack a tire with a
wheel on top of the three tires.
TIRE WITH WHEEL
W 6 U 8 1 0 W A X
6. Tie all tires together with wire.
W 6 U 8 1 0 W A S
7. Connect the SST (Deployment Tool) to the SST
(Harness Adapter).
49 D 066 002
W 6 U 8 1 0 W A W
0 8 -1 0 -9