Mazda MX-6 1998, Руководство по ремонту

Страница: 644 / 1282

CONVENTIONAL BRAKE SYSTEM
Flexible Hose Inspection
• Inspect for scars, cracks, and swelling of the
flexible hose. Replace the hose as necessary.
BRAKE PIPE REMOVAL/INSTALLATION
1. Remove the brake pipe by using the SST.
2. Disconnect the clip and remove the flexible hose
from the bracket.
W6U411W26
4. Connect the flexible hose to the brake pipe. Verify
that the hose is not twisted.
5. Tighten the flare nut by using the SST. Verify that
the hose can not come in contact with any other
parts of vehicle.
Tightening torque
12.9— 21.5 N m
{130— 220 kgf cm, 113— 190 in lbf}
W 6 U 4 1 1 W B R
3. Secure the flexible hose in the bracket and
connect the clip to it.
W 6 U 4 1 1 W B S
VACUUM LINE INSPECTION
1. Remove the clamps and vacuum hose.
2. Apply both suction and pressure to the
engine-side hose, and verify that air blows only
toward that side. If air flows in both directions or
not at all, replace the vacuum hose.
W 6 U 4 1 1 W 0 2
t
W 6 U 4 1 1 W A 1
W 6 U 4 1 1 W B Q
0 4 -1 1 -3