Mazda MX-6 1998, Руководство по ремонту

Страница: 1145 / 1282

GLASS/WINDOWS/MIRRORS
REAR POWER WINDOW REGULATOR INSPECTION
1. Disconnect the negative battery cable.
2. Remove the rear door trim.
3. Partially peel off the rear door screen.
4. Disconnect the rear power window regulator
connector.
5. Apply battery positive voltage to the rear power
window regulator terminals and check the
operation of the rear power window regulator.
C o n n ectio n
R egulator
ope ra tio n
B+ GND
A B Up
B
A Down
W 6 U 9 1 2 W 0 6
W 6 U 9 1 2 W A 6
If not as specified, replace the rear power window
regulator.
REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear door glass. (Refer to 09-12
REAR DOOR GLASS AND GUIDE
REMOVAL/INSTALLATION.)
3. Disconnect the negative battery cable.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
W 6 U 9 1 2 W 0 7
1 Connector
2 Nut
3 Bolt
4 Rear power window regulator
6.87— 9.80
{70—100,60.8—86.7)
(
2
)
6.87— 9.80
Q p {70— 100,60.8—86.7)
N m {k g f c m , in lbf}
W 6 U 9 1 2 W A 7
REAR MANUAL WINDOW REGULATOR REMOVAL/INSTALLATION
W 6 U 9 1 2 W 0 8
1. Remove the regulator handle. (Refer to 09-12
REGULATOR HANDLE REMOVAL.) (Refer to
0 9 -1 2 REGULATOR HANDLE INSTALLATION.)
2. Remove the rear door glass. (Refer to 09-12
REAR DOOR GLASS AND GUIDE
REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
0 9 -1 2 -4