Mazda MX-6 1998, Руководство по ремонту

Страница: 670 / 1282

ANTILOCK BRAKE SYSTEM
FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
W 6 U 4 1 3 W 0 4
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
N-m {kgf m, ft-lb f}
W 6 U 4 1 3 W A A
Connector
Bolt and nut
Front ABS wheel-speed sensor
FRONT ABS WHEEL-SPEED SENSOR INSPECTION
• Remove the wheel and tire, and inspect the
sensor for looseness and damage. Replace the
sensor as necessary.
Clearance Inspection
• Inspect for clearance between the wheel-speed
sensor and the sensor rotor.
Clearance
1.3— 2.0 mm {0.0512— 0.0787 in}
ABS WHEEL-SPEED SENSOR
CLEARANCE
W6U413WAB
W 6 U 4 1 3 W 0 5
Resistance Inspection
1. Disconnect the ABS wheel-speed sensor
connector.
2. Inspect for resistance at the ABS wheel-speed
sensor.
Resistance
1.28— 1.92 k ii
Voltage Inspection
1. On level ground, jack up the vehicle and support it
evenly on safety stands.
2. Disconnect the ABS wheel-speed sensor
connector.
3. Inspect each wheel by rotating it at one revolution
per second.
Voltage
0.23 V min. (AC)
4. If not as specified, replace the ABS wheel-speed
sensor.
7.9— 10.7 N m
{80— 110 k g fc m , 69.5— 95.4 in lb f}
19—25
{1.9—2.6,14— 19}
19— 25
{1.9—2.6,14— 19}
0 4 -1 3 -6