Mazda MX-6 1998, Руководство по ремонту, Страница: 601 / 1282

REAR AXLE
ABS Sensor Rotor (With ABS) Removal Note
Note
• The sensor rotor does not need to be removed
unless replacing it.
• Remove the sensor rotor by using a chisel.
Locknut Installation Note
• Install a new locknut and stake it as shown.
Tightening torque
177— 235 N m
{18.0— 24.0 kgf m, 131— 173 ft lbf}
ABS Sensor Rotor (With ABS) Installation Note
Note
• The ABS sensor rotor can be installed in
either direction.
1. Install a new rear ABS sensor rotor onto the wheel
hub.
2. Using a steel plate and the SST, press the rotor
until it is flush with the wheel hub.
W 6 U 3 1 2 W A 4
0.5 mm {0.02 in}
OR MORE I
WHEEL HUB, HUB SPINDLE PREINSPECTION (DISC BRAKE MODEL)
Wheel Bearing Play Inspection
(Refer to 03-11 WHEEL HUB, STEERING KNUCKLE
INSPECTION, Wheel Bearing Play Inspection.)
WHEEL HUB BOLT REPLACEMENT
W 6 U 3 1 2 W 0 4
(Refer to 03-11 WHEEL HUB BOLT
REPLACEMENT.)
0 3 -1 2 -3