Mazda MX-6 1998, Руководство по ремонту

Страница: 1220 / 1282

INTERIOR TRIM
C-PILLAR TRIM REMOVAL/INSTALLATION
1. Turn over the seaming welt.
2. Remove the rear package trim. (Refer to 09-17
REAR PACKAGE TRIM
REMOVAL/INSTALLATION.)
3. Remove the lower anchor of the rear seat belt.
4. Pull the C-pillar trim to disengage clips A and pin
B from the body.
5. Pull the C-pillar trim upward to disengage hook C
from the body.
W 6 U 9 1 7 W 2 4
REAR PACKAGE TRIM REMOVAL/INSTALLATION
W 6 U 9 1 7 W 2 5
1. Disconnect the negative battery cable.
2. Remove the rear side seat. (Refer to 09-13 REAR
SEAT REMOVAL/INSTALLATION.)
3. Remove the high-mount brake light.
4. Remove the fasteners.
5. Push up clips A from inside of trunk compartment
to disengage from the body.
6. Pull the rear package trim to disengage hooks B
from the body.
H O O K
3 ^ 5
CUP
A
REAR
PACKAGE
TRIM
W 6 U 9 1 7 W A S
7. Install in the reverse order of removal.
FRONT SCUFF PLATE REMOVAL/INSTALLATION
W 6 U 9 1 7 W 2 6
1. Pull the front scuff plate to disengage clips A and 2. Install in the reverse order of removal,
pin B from the body.
0 9 -1 7 -1 2