Mazda MX-6 1998, Руководство по ремонту

Страница: 566 / 1282

CONTROL SYSTEM [KL]
(3) Select the “ PID/DATA MONITOR AND
RECORD” function on the NGS tester display
and press TRIGGER.
(4) Select “CPP/PNP” on the NGS tester display
and press START. The NGS tester measures
and shows the operation.
Specification
Condition
“CPP/PNP” operation (V)
Other than neutral position
and clutch pedal released
OFF
Neutral position or clutch
pedal depressed
ON
In s p e c tio n o f C o n tin u ity
1. Disconnect the clutch switch connector.
2. Check continuity of the clutch switch by using an
ohmmeter.
O O : Continuity
C o n d itio n
Term inal
C E
Clutch pedal depressed
0 ---------- ---------O
Clutch pedal released
W 6 U 1 4 0 W N 9
(5) If not as specified, check the related harness
and clutch switch continuity.
(6) If okay, check the neutral switch.
W 6 U 1 4 0 W N 8
3. If not as specified, replace the clutch switch.
CLUTCH SWITCH REMOVAL/INSTALLATION [KL]
1. Disconnect the battery negative cable.
2. Disconnect the clutch switch connector.
3. Remove the cluch switch.
4. Install the clutch switch as shown in the figure.
W6U140W0W
__
j, IT-J — \y
R OTATE
90”
C L U T C H S W IT C H
w6Ui40WNA
0 1 -4 0 B -3 1