Mazda MX-6 1998, Руководство по ремонту

Страница: 13 / 1282

GENERAL INFORMATION
Special Tools
• Use special tools when they are required.
W6UOOOWAJ
Disconnection of the Negative Battery Cable
• Before beginning any work, turn the ignition switch
to LOCK, disconnect the negative battery cable
and then wait for more than 1 minute to allow the
backup power supply of the SAS unit to deplete its
stored power.
Removal of Parts
• While correcting a problem, also try to determine
its cause. Begin work only after first learning
which parts and subassemblies must be removed
and disassembled for replacement or repair. After
removing the part, plug all holes and ports to
prevent foreign material from entering.
W6U000WAK
Disassembly
• If the disassembly procedure is complex requiring
many parts to be disassembled, all parts should
be disassembled in a way that will not affect their
performance or external appearance and identified
so reassembly can be performed easily and
efficiently.
W6UOOOWAL
Arrangement of Parts
• All disassembled parts should be carefully
arranged for reassembly.
• Be sure to separate or otherwise identify the parts
to be replaced from those that will be reused.
Cleaning of Parts
• All parts to be reused should be carefully and
thoroughly cleaned in the appropriate method.
Warning
•
Using compressed air can cause dirt and
other particles to fly out causing injury to
the eyes. Wear protective eye wear
whenever using compressed air.
Inspection During Removal, Disassembly
• When removed, each part should be carefully
inspected for malfunctioning, deformation,
damage and other problems.
W 6 U 0 0 0 W A M
W6U000WAN
W6U000WAP
0 0 -0 0 -1 1