Mazda MX-6 1998, Руководство по ремонту

Страница: 1206 / 1282

EXTERIOR TRIM
14. Use white gasoline to remove any sealant that 16. Install the windshield wiper arm and blade. (09-19
oozes out. WINDSHIELD WIPER ARM AND BLADE
15. Check for water leaks. If a leak is found, wipe the REMOVAL/INSTALLATION.)
water off well and repeat the installation.
REAR WINDOW MOLDING REMOVAL
Note
The rear window molding is a replacement
part.
W 6 U 9 1 6 W 1 1
Remove the rear window glass when
removing the rear window molding. (Refer to
09-12 REAR WINDOW GLASS REMOVAL.)
REAR WINDOW MOLDING INSTALLATION
W 6 U 9 1 6 W 1 2
Note
• Install the rear window glass when installing
the rear window molding (Refer to 09-12
REAR WINDOW GLASS INSTALLATION.)
FRONT BELTLINE MOLDING REMOVAL/INSTALLATION
W 6 U 9 1 6 W 1 3
1. Remove the manual outside mirror or power
outside mirror. (Refer to 09-12 MANUAL
OUTSIDE MIRROR REMOVAL/INSTALLATION.)
(Refer to 09-12 POWER OUTSIDE MIRROR
REMOVAL/INSTALLATION.)
2. Remove the front door glass. (Refer to 09-12
FRONT DOOR GLASS AND GUIDE
REMOVAL/INSTALLATION.)
3. Remove the screw.
4. Insert a tape-wrapped flathead screwdriver under
the clip as shown.
5. Lift the flathead screwdriver and pull up on the
front beltline molding to remove it. _ , . „ . .. . . „
3 6. Install in the reverse order of removal.
REAR BELTLINE MOLDING REMOVAL/INSTALLATION
W 6 U 9 1 6 W 1 4
1. Remove the rear door glass. (Refer to 09-12
REAR DOOR GLASS AND GUIDE
REMOVAL/INSTALLATION.)
2. Remove the screw.
3. Insert a tape-wrapped flathead screwdriver under
the clip as shown.
4. Lift the flathead screwdriver and pull up on the
rear beltline molding to remove it.
5. Install in the reverse order of removal.
SCREW
FLATHEAD
SCREWDRIVER
W 6 U 9 1 6 W A G
FRONT BELTLINE
MOLDING
C LIP
FLATHEAD
SCREWDRIVER
W6U916WAH
REAR
MOLDING
CLIP
0 9 -1 6 -5