manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 558

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

558

User Manual 1173.9511.02 ─ 12

●

Paging Channel

●

Service Option 6 / Service Option 14

Selecting SO 6 or SO14 do not reconfigure the "1st Service Option". SO6 is used
with Multiplex Option 1. SO 14 is used with Multiplex Option 2.

Remote command: 

CONFigure:CDMA:SIGN<i>:SMS:OUTGoing:SMEThod

Acknowledgment

If checked, the R&S

 

CMW requests the MS to return an SMS acknowledge message

after receiving the short message.

The section "MS Info > Last Sent Message > Acknowledgment" shows whether the last
outgoing message was acknowledged.

If 

Not Acknowledged

 is returned, it can indicate that acknowledgment was either not

requested or not supported by the MS.

Remote command: 

CONFigure:CDMA:SIGN<i>:SMS:OUTGoing:ACKNowledge

Add Time Stamp

If checked, the R&S

 

CMW adds the current time in each sent message. Therefore it is

possible to make different short messages with the same text distinguishable. The time
stamp prevents the MS from rejecting repeated identical messages. Format:

hh:mm:ss

. Refer to 

chapter 4.2.15.2, "SMS: Message File Format"

, 

on page 484

Remote command: 

CONFigure:CDMA:SIGN<i>:SMS:OUTGoing:ATSTamp

Large SMS Handling

Manage SMS messages, which exceed the maximum physical size of an SMS mes-
sage. According to the transmit method (PCH, SO6, SO14, Traffic Channel) and data
encoding (ASCII, binary or unicode) the maximum physical size of one SMS varies.

●

Truncate

: Truncate the outgoing SMS message text to the length of one SMS

message.

●

Multiple SMS

: If the SMS message exceeds the maximum physical size of one

SMS, the R&S

 

CMW cuts the entire message into multiple messages whenever the

maximum physical size of one message is reached. The R&S

 

CMW sends the mul-

tiple messages consecutively.

Remote command: 

CONFigure:CDMA:SIGN<i>:SMS:OUTGoing:LHANdling

Outgoing Message Handling

Defines which source is used as outgoing message.

●

Use Internal

: Use the text defined at 

Internal > Outgoing SMS

.

●

From File

: Use the text contained in the stored file identified by 

File Selection >

Select File...

.

Remote command: 

CONFigure:CDMA:SIGN<i>:SMS:OUTGoing:MESHandling

GUI Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands