manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 611

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

611

User Manual 1173.9511.02 ─ 12

<24_CommonChx3> NSUP | SUPP

3X_CCH_SUPPORTED

. 3X Common Channel supported.

Queries whether the MS supports the Spreading Rate 3 com-
mon channels (3X BCCH, 3X F-CCCH, and 3X R-EACH) or not.

Example: 

See 

Query MS information

Usage: 

Query only

Firmware/Software: 

V1.0.15.0

Manual operation:

See 

"Common Capabilities"

 

on page 509

CONFigure:CDMA:SIGN<i>:CAPabilities:FDRSupport:FCH?
CONFigure:CDMA:SIGN<i>:CAPabilities:FDRSupport:SCH?
CONFigure:CDMA:SIGN<i>:CAPabilities:FDRSupport:DCCH?

Queries whether the MS supports the Flexible Data Rate (FDR) for the corresponding
forward and the reverse channel. This command is available for the Fundamental
Channel (FCH), Dedicated Control Channel (DCCH) and Supplemental Channel
(SCH).

Return values: 

<ForwardDCCH>

OFF | ON
FDR support for the forward channel.

<ReverseDCCH>

OFF | ON
FDR support for the reverse channel.

Example: 

See 

Query MS information

Usage: 

Query only

Firmware/Software: 

V1.0.15.0

Manual operation:

See 

"Flexible Data Rate Support"

 

on page 510

CONFigure:CDMA:SIGN<i>:CAPabilities:GLOCation?

Queries capabilities from the MS about geo-location. Refer to 3GPP2 C.S0005 for
details.

Return values: 

<Capabilities>

NSUP | SUPP
Queries if the MS supports geo-location capabilities generally.

NSUP

: Not supported

SUPP

: Supported

<Included>

NSUP | SUPP

GEO_LOC_INCL

. Geo-location Included indicator. Specifies if

the message on the R-SCH contain the 

GEO_LOC_TYPE

 field

or not.

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands