manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 615

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

615

User Manual 1173.9511.02 ─ 12

Return values: 

<SClassSupport>

OFF | ON
Returns the supported MS band subclass in the form: (OFF|ON),
(OFF|ON), (OFF|ON), (OFF|ON), (OFF|ON), (OFF|ON), (OFF|
ON) to indicate not supported (OFF) or supported (ON) for band
subclasses 0 through 7.

Example: 

See 

Query MS information

Usage: 

Query only

Firmware/Software: 

V1.0.15.0

Manual operation:

See 

"Subclass Support"

 

on page 505

CONFigure:CDMA:SIGN<i>:CAPabilities:SOSupport:FFCH?

Queries which service options the MS supports on the forward fundamental channel.

Returns the supported service option in the form: <Number>{, <Name>, <State>}... for
all supported service options (see 

chapter 4.2.11, "Service Options "

, 

on page 475).

Return values: 

<Number>

Service option number.
Range: 

0  to  99

<Name>

Service option name.

<State>

OFF | ON

Example: 

See 

Query MS information

Usage: 

Query only

Firmware/Software: 

V1.0.15.0

Manual operation:

See 

"Service Options Support [0]"

 

on page 505

CONFigure:CDMA:SIGN<i>:CAPabilities:SOSupport:RFCH?

Queries which service options the MS supports on the reverse fundamental channel.

Returns the supported service option in the form: <Number>{, <Name>, <State>}... for
all supported service options (see 

chapter 4.2.11, "Service Options "

, 

on page 475).

Return values: 

<Number>

Service option number.
Range: 

0  to  99

<Name>

Service option name.

<State>

OFF | ON

Example: 

See 

Query MS information

Usage: 

Query only

Firmware/Software: 

V1.0.15.0

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands