![Rohde & Schwarz CMW-KE100 User Manual Download Page 413](http://html.mh-extra.com/html/rohde-and-schwarz/cmw-ke100/cmw-ke100_user-manual_1477807413.webp)
1xEV-DO Measurements
R&S
®
CMW-KM8xx/-KS8xx
413
User Manual 1173.9511.02 ─ 12
<MError>
Comma separated list of values, one per active segment.
Range:
-100 % to +100 % (AVERage: 0% to 100 %, SDE-
Viation: 0 % to 50 %)
Default unit: %
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V3.0.10
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
AVERage?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
CURRent?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
MAXimum?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
SDEViation?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:
AVERage?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:
CURRent?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:
MAXimum?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:
SDEViation?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:PEAK:
SDEViation?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:MODulation:PERRor:RMS:
SDEViation?
Returns peak and RMS phase error (statistical) values for all active list mode seg-
ments.
The values described below are returned by
FETCh
commands.
CALCulate
com-
mands return limit check results instead, one value for each result listed below.
Return values:
<Reliability>
chapter 3.5.1.6, "Reliability Indicator"
Command Reference
深圳德标仪器
135-1095-0799