manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 687

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

687

User Manual 1173.9511.02 ─ 12

CALL:CDMA:SIGN<i>:OTASp:RECeive:READ?

Returns the oldest message from the receive queue.

Return values: 

<ReceiveStatus>

EMPTy | SUCCess

EMPTy

: no message in the receive queue

SUCCess

: the message successfully received

<TimeStamp>

The message transmit time for the delivery status 

SUCC

 with

granularity of 20 ms
Increment:  10 ns
Default unit: s

<ReceiveMethod>

TCH

TCH

: An existing call was used to receive the message.

<ByteArray>

<dblock>
Binary data blocks received from the MS. The data format corre-
sponds to IEEE-488.2.

Example: 

See 

Using Data Burst Messages

Usage: 

Query only

Firmware/Software: 

V3.5.10

CALL:CDMA:SIGN<i>:PDM:RECeive:READ?

Returns the oldest message from the receive queue.

Return values: 

<ReceiveStatus>

EMPTy | SUCCess

EMPTy

: no message in the receive queue

SUCCess

: the message successfully received

<TimeStamp>

The message transmit time for the delivery status 

SUCC

 with

granularity of 20 ms
Increment:  10 ns
Default unit: s

<ReceiveMethod>

ACH | TCH

ACH

: Access channel was used to receive the message

TCH

: An existing call was used to receive the message.

<ByteArray>

<dblock>
Binary data blocks received from the MS. The data format corre-
sponds to IEEE-488.2.

Example: 

See 

Using Data Burst Messages

Usage: 

Query only

Firmware/Software: 

V3.5.10

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands