Rohde & Schwarz CMW-KE100, User Manual

Page: 86 / 938

1xEV-DO Signaling
R&S
®
CMW-KM8xx/-KS8xx
86 User Manual 1173.9511.02 ─ 12
Fig. 2-39: MAC layer settings for release 0 (subtype 0/1)
Def Rev Traffic Ch MAC Protocol ................................................................................. 86
└ Data Offset Nom ............................................................................................. 86
└ Data ... ............................................................................................................ 86
└ Increasing / Decreasing Transition ................................................................. 86
Def Rev Traffic Ch MAC Protocol
The Default Reverse Traffic Channel MAC Protocol provides the procedures followed
by the AT to transmit, and by the AN to receive the Reverse Traffic Channel.
Data Offset Nom ← Def Rev Traffic Ch MAC Protocol
"Data Offset Nom" indicates the nominal offset of the Reverse Traffic Channel power
from the Reverse Pilot Channel power. At present, this parameter is not supported.
Remote command:
CONFigure:EVDO:SIGN<i>:LAYer:MAC:DRTProtocol:DONom?
Data ... ← Def Rev Traffic Ch MAC Protocol
Reverse Traffic Channel power at different data rates relative to the Reverse Pilot
Channel power in 0.25 dB steps.
Remote command:
CONFigure:EVDO:SIGN<i>:LAYer:MAC:DRTProtocol:DRATe
Increasing / Decreasing Transition ← Def Rev Traffic Ch MAC Protocol
The probability of the access terminal to increase / decrease its transmission rate to
the next higher data rate. The probability is expressed in integer multiples of 1/255; the
integer value is a 2-digit hexadecimal number. The rate transition probability is one of
the rate parameter attributes in the ConfigurationRequest message of the Reverse
Traffic Channel MAC Protocol.
Remote command:
CONFigure:EVDO:SIGN<i>:LAYer:MAC:DRTProtocol:ITRansition
CONFigure:EVDO:SIGN<i>:LAYer:MAC:DRTProtocol:DTRansition
GUI Reference
深圳德标仪器
135-1095-0799