![Rohde & Schwarz CMW-KE100 User Manual Download Page 93](http://html.mh-extra.com/html/rohde-and-schwarz/cmw-ke100/cmw-ke100_user-manual_1477807093.webp)
1xEV-DO Signaling
R&S
®
CMW-KM8xx/-KS8xx
93
User Manual 1173.9511.02 ─ 12
Initial Adjust
Initial power offset for access probes (ProbeInitialAdjust parameter in the AccessPara-
meters Message). "Initial Adjust" is a correction factor to be used by access terminals
in the open loop power estimate, expressed as a two’s complement value in units of 1
dB.
Setting this parameter requires option R&S CMW-KS890.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:IADJust
Open Loop Adjust
Nominal transmit power offset (OpenLoopAdjust) to be used by ATs for the given band
class in the open loop power estimate, in steps of 1 dB.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:OLADjust
Probe Increment
Step size of power increases (PowerStep) between consecutive access probes with a
resolution of 0.5 dB.
Setting this parameter requires option R&S CMW-KS890.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:PINCrement
Probes per Sequence
Maximum number of access probes (ProbeNumStep) which ATs are to transmit in a
single access probe sequence.
Setting this parameter requires option R&S CMW-KS890.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:PPSequence
Preamble Length
Length in frames of the access probe preamble (PreambleLength).
Setting this parameter requires option R&S CMW-KS890.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:PLENgth
Access Cycle Duration
Length in slots of the access channel cycle. When using the Default Access Channel
Protocol, an AT may start to transmit an access probe only at the beginning of an
access cycle.
With the Enhanced Access Channel Protocol (network revision A), an AT may start to
transmit an access probe only Access Offset slots after the beginning of an access
cycle.
Setting this parameter requires option R&S CMW-KS890.
Remote command:
CONFigure:EVDO:SIGN<i>:NETWork:APRobes:ACDuration
GUI Reference
深圳德标仪器
135-1095-0799