manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 689

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

689

User Manual 1173.9511.02 ─ 12

Firmware/Software: 

V3.5.10

CALL:CDMA:SIGN<i>:OTASp:SEND:STATus?

Returns the status, timestamp and transport of the last message sent.

Return values: 

<DeliveryStatus>

SUCCess | ACKTimeout | PENDing | CSTate | BADData

SUCCess

: successfully transmitted

ACKTimeout

: acknowledgment timeout appeared

PENDing

: message pending in the outgoing buffer

CSTate

: wrong call state (wrong service option or no registered

device)

BADData

:wrong message length (zero or too long)

<TimeStamp>

The message transmit time for the delivery status 

SUCC

 or 

ACKT

with granularity of 20 ms
Increment:  10 ns
Default unit: s

<SendMethod>

NONE | TCH

NONE

: The message has not been sent yet.

TCH

: An existing call was used to send the message.

Example: 

See 

Using Data Burst Messages

Usage: 

Query only

Firmware/Software: 

V3.5.10

CALL:CDMA:SIGN<i>:PDM:SEND:STATus?

Returns the status, timestamp and transport of the last message sent.

Return values: 

<DeliveryStatus>

SUCCess | ACKTimeout | PENDing | CSTate | BADData

SUCCess

: successfully transmitted

ACKTimeout

: acknowledgment timeout appeared

PENDing

: message pending in the outgoing buffer

CSTate

: wrong call state (wrong service option or no registered

device)

BADData

:wrong message length (zero or too long)

<TimeStamp>

The message transmit time for the delivery status 

SUCC

 or 

ACKT

with granularity of 20 ms
Increment:  10 ns
Default unit: s

<SendMethod>

NONE | PCH | TCH

NONE

: The message has not been sent yet.

PCH

: The message was sent using PCH.

TCH

: An existing call was used to send the message.

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands