manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 536

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

536

User Manual 1173.9511.02 ─ 12

All time settings will only apply at signal ON. Changing the time (on an SUU) costs
about 3-4 seconds.

Fig. 4-43: System time settings

Time Source

................................................................................................................536

Date / Time

..................................................................................................................536

Local Time Offset

........................................................................................................ 536

Leap Seconds

............................................................................................................. 537

Daylight Saving Time Indicator

................................................................................... 537

Sync Code

...................................................................................................................537

Apply Time At

..............................................................................................................537

Time Source

This parameter selects the source for the time settings.

●

CMW Time

This selects the current CMW time (thus Windows time) as the time source. DUT
considers the CMW time as UTC.

●

Date / Time

With this time source selected, the value of the parameters "Date Time", "Local
Time Offset", "Daylight Saving Time" and "Leap Seconds" will be used. This pro-
vides a repeatable and well-defined time reference.

●

Sync Code

With this time source selected, the value of parameter "Sync Code" will be used.
"Sync Code" is only needed for synchronization in 

Hybrid Mode on Two (or more)

SUU

. In order to access this setting, software option R&S CMW-KS888 needs to

be present.

Remote command: 

CONFigure:CDMA:SIGN<i>:SYSTem:TSOurce

Date / Time

This setting will be applied if "Time Source" has been set to "Date / Time". The settings
are interpreted as UTC.

Remote command: 

CONFigure:CDMA:SIGN<i>:SYSTem:DATE
CONFigure:CDMA:SIGN<i>:SYSTem:TIME

Local Time Offset

This is an offset from UTC according to the time zone of a region on Earth, where the
CMW operates. In addition, hexadecimal value is displayed. This parameter is defined
in 3GPP2 C.S0005.

GUI Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands