1xEV-DO Signaling
R&S
®
CMW-KM8xx/-KS8xx
224
User Manual 1173.9511.02 ─ 12
The related carrier has to be pre-selected using the
command.
The values described below are returned by
FETCh
and
READ
commands.
CALCulate
commands return limit check results instead, one value for each result listed below.
Query parameters:
<DataRate>
R0K0 | R19K2 | R38K4 | R76K8 | R115k2 | R153k6 | R230k4 |
R307k2 | R460k8 | R614k4 | R921k6 | R1228k8 | R1843k2 |
TOTal
This query parameter specifies the data rate for which the
results shall be returned, i.e. it selects a row in the "Reverse
Link Performance" result table. If omitted, the TOTal values are
returned, i.e. the aggregates over all data rates.
Note that the "Composite" return values are aggregates over all
carriers
and
data rates, i.e. no matter which data rate is speci-
fied, always the
TOTal
values are returned.
Return values:
<Reliability>
<PacketSize>
The packet size corresponding to the specified DataRate, given
as string representations of the enum constants S128 | S256 |
S512 | S1K | S2K | S3K | S4K | S5K | TOTal.
<MACPackReceived> The number of MAC packets successfully received by the
R&S
CMW (on the selected carrier).
Range:
0 to 10E+3
<ThVsTestTime>
The average throughput in kbit/s (on the selected carrier) during
the test time
Range:
0 kbit/s to 99.3 kbit/s
<TestTime>
The elapsed test time as a number of 26.67 ms CDMA frames.
Range:
0 to 10E+3
<AllThVsTestTime>
The average throughput in kbit/s (on the selected carrier) during
the test time
Range:
0 kbit/s to 99.3 kbit/s
Example:
See
Perform Reverse Link Measurements
Usage:
Query only
Firmware/Software:
V2.1.20
Options:
R&S CMW-KS890; multi-carrier support requires R&S CMW-
KS881.
Manual operation:
See
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
Command Reference
深圳德标仪器
135-1095-0799
