manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 485

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

485

User Manual 1173.9511.02 ─ 12

messages are identical, so that a received message can be used to send it again. This
is an easy way to create message files. The SMS message file format has a header
with all necessary information. Some of this information will not be used in both direc-
tions. In this case, the information will be blanked out.

Table 4-11: SMS message supported file format

Label

Value

Rx

Tx

ENCODING=

ASCII, BINARY, UNICODE

M

M

TELESERVICEID=

CMT-91, CPT-95, CMT-95 (Default for Tx), VMN-95, WAP, WEMT,
SCPT, CATPT

M

O

TIMESTAMP=

<hh:mm:ss>

M

n/a

SENDMETHOD=

ACCESS CHANNEL (only Rx), PAGING CHANNEL (only Tx), TRAFFIC
CHANNEL, SERVICE OPTION 6, SERVICE OPTION 14

M

O

DATA=

●

Data according to ENCODING setting

●

Multiple data lines allowed for sequential SMS

●

CR/LF is not allowed in data field, as this is used as delimiter

●

HEX representation for all non-ASCII formats

M

M

(M=mandatory, O=optional, n/a= not applicable)

Since the channels do have different capacities the length of one message depends on
the selected transmit method. After sending or receiving the SMS the R&S

 

CMW "MS

Info" display shows the information about the length of the sent or received SMS.

If a SMS message is entered at the GUI, the text is always encoded as ASCII and Tel-
eservice ID 

CMT-95

 (Wireless Messaging Teleservice) is used.

SMS: Encoding and Data

The R&S

 

CMW sends and receives messages with data encoding of 7-bit ASCII, 8-bit

binary (2 hex-chars per byte) and 16-bit unicode (4 hex-chars per unicode character).

The maximum quantity of text characters allowed on the data line depends on the used
channel, the encoding and on whether or not a timestamp is used. For the timestamp
assume 9 characters.

Traffic Channel

ASCII: 160 characters

Binary: 140 bytes (2 hex-chars per byte)

Unicode: 70 characters (4 hex-chars per Unicode character)

Paging Channel

ASCII: 73 characters

Binary: 64 bytes (2 hex-chars per byte)

Unicode: 32 characters (4 hex-chars per Unicode character)

General Description

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands