Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 809 / 828

A - 161
Appendices
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
A-4 Sys
m
ac Error S
ta
tus C
o
d
es
A
A-4
-2 Err
or De
scriptions
Event name Encoder Lifetime Warning Event code 08470000 hex
Description The encoder lifetime is close to the end.
Source
EtherCAT Master Function Mod-
ule
Source details
Slave Detection
timing Continuously
Error
attributes
Level
Observation
*1
*1. You can change the level to minor fault by using Warning Level Change 1 Selection (4020-05 hex).
Recovery
---
Log category
System log
Effects User program Continues. Operation Not affected.
Indicators
EtherCAT NET RUN EtherCAT NET ERR EtherCAT LINK/ACT
--- --- ---
System
-defined
variables Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
Temporary noise If this event occurs repeatedly, the
lifetime is close to the end.
Replace the motor. None
The end of the encoder life
Attached
information None
Precautions/
Remarks AL status code: -, Error No.: A706 hex
Event name Fan Rotation Warning Event code 084C0000 hex
Description The rotation speed of the fan is 80% or less of the rating and the cooling performance decreases.
Source
EtherCAT Master Function Mod-
ule
Source details
Slave Detection
timing Continuously
Error
attributes
Level
Observation
*1
*1. You can change the level to minor fault by using Warning Level Change 1 Selection (4020-05 hex).
Recovery
---
Log category
System log
Effects User program Continues. Operation Not affected.
Indicators
EtherCAT NET RUN EtherCAT NET ERR EtherCAT LINK/ACT
--- --- ---
System
-defined
variables Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
There is a foreign matter in the
cooling fan and it blocks the rota-
tion Check whether there is a foreign
matter in the fan. If you find a for-
eign matter, remove it. Do not use the fan in an area sur-
rounded by excessive foreign mat-
ter. Also, do not allow foreign
matter to enter.
Cooling fan failure If there is no improvement after
you performed the correction
above, replace the Servo Drive.
Attached
information None
Precautions/
Remarks AL status code: -, Error No.: A300 hex