Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 168 / 828

3 Specifications
3 - 4 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
The characteristics of the Servo Drives are shown below.
3-1-2 Characteristics
100-VAC Input Models
Servo Drive model (R88D-) 1SN01L-ECT 1SN02L-ECT 1SN04L-ECT
Item 100 W 200 W 400 W
Input Main circuit Power sup-
ply voltage
Single-phase 100 to 120 VAC (85 to 132 V)
*1
*1. The values outside parentheses indicate the rated value, and the values inside parentheses indicate the range
of acceptable variation.
Frequency
50/60 Hz (47.5 to 63 Hz)
*1
Control circuit Power sup-
ply voltage 24 VDC (21.6 to 26.4)
Current con-
sumption
*2
*2. Select a DC power supply in consideration of the current values that are specified in the current consumption.
The rated current value that is printed on the product nameplate is a condition to apply the 1S-series product
for the UL/Low Voltage Directive.
Therefore, you do not need to consider it when you select a DC power supply for each model.
600 mA
Rated input current
[A (rms)] (Main circuit
power supply voltage:
120 VAC) Single-phase 2.9 4.9 8.4
3-phase --- --- ---
Out-
put Rated current [A (rms)] 1.5 2.5 4.8
Maximum current [A (rms)] 4.7 8.4 14.7
Maximum power loss at power conversion 10% (Load condition: rated output)
Applicable Servomotor rated output [W] 100 200 400
3,000-r/min Servomotor
(R88M-) Batteryless
23-bit ABS 1M10030S 1M20030S 1M40030S
Hold time at momentary power interruption
(Main circuit power supply voltage: 100 VAC)
10 ms (Load condition: rated output)
*3
*3. The control power supply is not specified here as long as a DC power supply that meets the following condi-
tions is used.
Reinforced insulation or double insulation, and the output hold time of 10 ms or more
Weight [kg] 1.2 1.5 1.9