Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 607 / 828

12 - 7
12 Troubleshooting
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
12-2
W
ar
n
ing
s
12
12-
2-1
Rela
ted Ob
ject
s
4020 04 Warning Hold
Selection Selects whether to hold or not the warning state.
Bit 0:
0: Not hold the warning enabled in Warning Mask 1 Selec-
tion.
The warning is automatically cleared when the cause of the
warning is eliminated. However, the warning is held for at
least 1 second.
1: Hold the warning enabled in Warning Mask 1 Selection.
After the cause of the warning is eliminated, the error reset
command must be sent.
Bit 2:
0: Not hold the warning enabled in Warning Mask 3 Selec-
tion.
The warning is automatically cleared when the cause of the
warning is eliminated. However, the warning is held for at
least 1 second.
1: Hold the warning enabled in Warning Mask 3 Selection.
After the cause of the warning is eliminated, the error reset
command must be sent.
P. 9-82
05 Warning Level
Change 1 Selec-
tion When a bit is set to 1, the level of the corresponding warn-
ing is set as the error.
bit 0: Overload Warning
bit 1: Regeneration Overload Warning
bit 2: Encoder Communications Warning
bit 3: Motor Vibration Warning
bit 4: Capacitor Lifetime Warning
bit 5: Inrush Current Prevention Relay Lifetime Warning
bit 7: Brake Interlock Output Relay Lifetime Warning
bit 9: Lifetime Information Corruption Warning
bit 10: Encoder Lifetime Warning
bit 11: Fan Rotation Warning
bit 12: Absolute Encoder Counter Overflow Warning P. 9-82
07 Warning Level
Change 3 Selec-
tion When a bit is set to 1, the level of the corresponding warn-
ing is set as the error.
bit 0: Data Setting Warning
bit 1: Command Warning
bit 2: EtherCAT Communications Warning P. 9-83
Index (hex)
Subindex
(hex)
Name Description
Refer-
ence