Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 306 / 828

4 Configuration and Wiring
4 - 40 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
The value of the inrush current varies depending on the input voltage to the Servo Drive. The values
shown above are for the following input voltages.
• Select a leakage breaker which is made for high frequency and surge resistance.
• When you determine the threshold value for leakage current detection, add the total leakage current
from all devices that are connected to the same breaker.
• Refer to the catalogs from the manufacturers for details on how to select a leakage breaker and
ensure a sufficient margin.
R88D-1SN30F-ECT 32 A
*1. If an external regeneration resistor is attached, the inrush
currents of the main circuit power supplies in the above table
will be increased.
(Increase in current =
√ 2 × main circuit power supply volt-
age/external regeneration resistance)
Model
Main circuit power
supply voltage
R88D-1SN L-ECT 120 VAC
R88D-1SN H-ECT 240 VAC
R88D-1SN F-ECT 480 VAC
Leakage Breaker
Servo Drive
model
(R88D-)
Servomotor
model
(R88D-)
Input power
Leakage current
(3 m cable)
Increase per 10 m of
cable length
1SN01L-ECT 1M10030S Single-phase 100 V 0.6 mA 0.3 mA
1SN02L-ECT 1M20030S Single-phase 100 V
1SN04L-ECT 1M40030S Single-phase 100 V
1SN01H-ECT 1M10030T Single-phase 200 V 1.5 mA 1.3 mA
3-phase 200 V
1SN02H-ECT 1M20030T Single-phase 200 V
3-phase 200 V
1SN04H-ECT 1M40030T Single-phase 200 V
3-phase 200 V
1SN08H-ECT 1M75030T Single-phase 200 V
3-phase 200 V
1SN10H-ECT 1L1K030T 3-phase 200 V
1M1K020T 3-phase 200 V
1M90010T 3-phase 200 V
Servo Drive model
Inrush current (Ao-p)
Main circuit power supply