Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 439 / 828

9 - 9
9 Details on Servo Parameters
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
9
-2 Co
mm
on
Con
trol Obj
ect
s
9
9-
2-1
3000 hex: Basi
c
Funct
ions
• Gives the failure cause when the motor does not rotate.
• If the value of a bit is
1 , the motor stop cause which corresponds to the bit is present.
z Description of Set Values
• Gives the present mode of operation.
• Mirror object of 6061 hex
z Description of Set Values
• Gives the functions which are supported by the Servo Drive.
• Mirror object of 60D9 hex
z Description of Set Values
Subindex 82 hex: Motor Stop Cause
Bit Description
0 Main circuit power supply not turned ON
1 Not Servo ON
2 Drive Prohibition state
3 Software Position Limit state
4 Position command variation is 0
5 Velocity command value is 0
6 Max profile velocity is 0
7 Torque command value is 0
8 Torque limit value is 0
9 Velocity Limit in Torque Control is 0
31 STO status
Subindex 83 hex: Modes of Operation Display
Set
value
Description
0 Not specified.
1 Profile position mode (pp)
3 Profile velocity mode (pv)
6 Homing mode (hm)
8 Cyclic synchronous position mode (csp)
9 Cyclic synchronous velocity mode (csv)
10 Cyclic synchronous torque mode (cst)
Subindex 84 hex: Supported Functions
Set value Description
Bit 0 Status Toggle
0: Disabled
1: Enabled
Bits 1 to 31 Reserved