Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 26 / 828

Safety Precautions
24 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
• Do not store or install the Servo Drive in the following locations. Doing so may result in electric shock,
fire, equipment damage, or malfunction.
Locations subject to direct sunlight
Locations subject to temperatures outside the range specified in the specifications
Locations subject to humidity outside the range specified in the specifications
Locations subject to condensation as the result of severe changes in temperature
Locations subject to corrosive or flammable gases
Locations subject to dust (especially iron dust) or salts
Locations subject to exposure to water, oil, or chemicals
Locations subject to shock or vibration
• Medical electronics such as cardiac pacemakers may malfunction or injury may result.
• Provide safety measures, such as a fuse, to protect against short circuiting of external wiring and fail-
ure of the Servo Drive. Fire may result.
• If an error occurs, remove the cause of the error and ensure safety, and then perform the error reset
and restart the operation. Injury, equipment damage, or burning may result.
• Use a robot cable for the wiring to separately install the Servo Drive and Servomotor to moving and
fixed parts of the equipment. Equipment damage may result.
• Connect the Servo Drive to the Servomotor without a contactor, etc. Malfunction or equipment dam-
age may result.
• Take appropriate and sufficient countermeasures to provide shielding when installing systems in the
following locations. Not doing so may result in failure.
Locations subject to static electricity or other forms of noise
Locations subject to strong electromagnetic fields
Locations subject to possible exposure to radioactivity
Locations close to power lines
• When lifting a 20-kg or more Servo Drive during moving or installation, always have two people lift
the product by grasping a metal part other than the shaft.
Do not grasp a plastic part. Injury or failure may result.
Relevant model: R88M-1M2K010T0-B
, R88M-1M3K010T- , R88M-1M2K010C-B ,and
R88M-1M3K010C-
• Check that the eye bolts are not loose after replacing them.
If they are loose, the screws can come off and the Servomotor may fall during the transportation by
the use of eye bolts.
Do not put the human body under the Servomotor during the transportation.
Precautions for Safe Use
General Precaution
Wiring
Precautions for Correct Use
General Precaution
Transporting and Unpacking