Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 758 / 828

Appendices
A - 110 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
Error Descriptions
Event name ESC Error Event code 05430000 hex
Meaning An error occurred in the EtherCAT slave communications controller.
Source
EtherCAT Master Function Mod-
ule
Source details
Slave Detection
timing At power ON
Error
attributes
Level
Minor fault
Recovery
Error reset
(after cycling
slave power)
Log category
System log
Effects User program Continues. Operation Power drive circuit is OFF
Indicators
EtherCAT NET RUN EtherCAT NET ERR EtherCAT LINK/ACT
--- --- ---
System
-defined
variables Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
Error of the EtherCAT slave com-
munications controller or false
detection when the AL status
code is 0051 hex If this event occurs repeatedly
after you cycled the power supply,
the EtherCAT slave communica-
tions controller is faulty. Replace
the Servo Drive. None
Error access from the
non-OMRON EtherCAT master
when the AL status code is 0050
hex Please contact the manufacturer
of EtherCAT master.
Attached
information None
Precautions/
Remarks AL status code: 0050 hex or 0051 hex, Error No.: 8804 hex