manualshive.com logo in svg

Siemens SINAMICS G120, List Manual

The Siemens SINAMICS G120 is a state-of-the-art drive system aimed at providing seamless motor control across a wide range of industries. To ensure proper installation, users can easily access the comprehensive Hardware Installation Manual, available for free download on our website.

Share
Download
background image

3 Function diagrams
3.1 Table of contents

SINAMICS G120 CU250S-2 Control Units

734

 

List Manual, 09/2017, A5E33842890

6710 – Current setpoint filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

906

6714 – Iq and Id controllers   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

907

6721 – Id setpoint (PMSM, p0300 = 2xx)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

908

6722 – Field weakening characteristic, flux setpoint (ASM, p0300 = 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . 

909

6723 – Field weakening controller, flux controller, Id setpoint (ASM, p0300 = 1) . . . . . . . . . . . . . . . . . . . 

910

6724 – Field weakening controller (PMSM, p0300 = 2xx)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

911

6730 – Interface to the Power Module (ASM, p0300 = 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

912

6731 – Interface to the Power Module (PMSM, p0300 = 2xx)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

913

6799 – Display signals  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

914

3.19 U/f control, Standard Drive Control (p0096 = 1)

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

915

6850 – U/f control, overview (p0096 = 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

916

6851 – U/f control, characteristic and voltage boost (p0096 = 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

917

6853 – U/f control, resonance damping and slip compensation (p0096 = 1)  . . . . . . . . . . . . . . . . . . . . . . 

918

6854 – U/f control, Vdc_max controller and Vdc_min controller (p0096 = 1)  . . . . . . . . . . . . . . . . . . . . . . 

919

6856 – U/f control, interface to the Power Module (ASM, p0300 = 1, p0096 = 1)   . . . . . . . . . . . . . . . . . . 

920

3.20 Vector control, Dynamic Drive Control (p0096 = 2)

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

921

6820 – Speed control and generation of the torque limits, overview (p0096 = 2)   . . . . . . . . . . . . . . . . . . 

922

6821 – Current control, overview (p0096 = 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

923

6822 – Speed setpoint, precontrol balancing, acceleration model (p0096 = 2)  . . . . . . . . . . . . . . . . . . . . 

924

6823 – Moment of inertia estimator (p0096 = 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

925

6824 – Speed controller with Kp_n/Tn_n adaptation (p0096 = 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

926

6826 – Torque setpoint (p0096 = 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

927

6827 – Vdc_max controller and Vdc_min controller (p0096 = 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

928

6828 – Current/power/torque limits (p0096 = 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

929

6832 – Current setpoint filter (p0096 = 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

930

6833 – Iq and Id controllers (p0096 = 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

931

6836 – Id setpoint (PMSM, p0300 = 2xx, p0096 = 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

932

6837 – Field weakening characteristic, flux setpoint (ASM, p0300 = 1, p0096 = 2) . . . . . . . . . . . . . . . . . 

933

6838 – Field weakening controller, flux controller, Id setpoint (ASM, p0300 = 1, p0096 = 2)   . . . . . . . . . 

934

6839 – Field weakening controller (PMSM, p0300 = 2xx, p0096 = 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . 

935

6841 – Interface to the Power Module (ASM, p0300 = 1, p0096 = 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . 

936

6842 – Interface to the Power Module (PMSM, p0300 = 2xx, p0096 = 2)  . . . . . . . . . . . . . . . . . . . . . . . . 

937

3.21 Technology functions

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

938

7010 – Friction characteristic  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

939

7017 – DC braking (ASM, p0300 = 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

940

Summary of Contents for SINAMICS G120









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SINAMICS G120

GE NetworX NX-6V2 Installation Instructions Manual preview
NetworX NX-6V2
Brand: GE Pages: 8
IBM 3708 End-User Reference preview
3708
Brand: IBM Pages: 144
TCS Basys Controls QD Series Troubleshooting Worksheet preview
QD Series
Brand: TCS Basys Controls Pages: 2
Vasco RF User And Installation Manual preview
RF
Brand: Vasco Pages: 32
Abra AK-10 User Manual preview
AK-10
Brand: Abra Pages: 16
SAI Connect Operation Manual preview
Connect
Brand: SAI Pages: 16
Hable One Starting Manual preview
One
Brand: Hable Pages: 3
Danfoss EKC 316A Reference Manual preview
EKC 316A
Brand: Danfoss Pages: 16
Danfoss ASV-P Installation Manual preview
ASV-P
Brand: Danfoss Pages: 20
Daktronics All Sport 5000 Operation Instructions preview
All Sport 5000
Brand: Daktronics Pages: 5
Daikin BRC2E52C7 Quick Reference preview
BRC2E52C7
Brand: Daikin Pages: 12
Harmonic Drive CHA Engineering Data preview
CHA
Brand: Harmonic Drive Pages: 85
IFM CR710S Original Operating Instructions preview
CR710S
Brand: IFM Pages: 49
National Instruments sbRIO-9629 Quick Reference Manual preview
sbRIO-9629
Brand: National Instruments Pages: 2
OJ Electronics OJ-Air2-WP55 Instructions Manual preview
OJ-Air2-WP55
Brand: OJ Electronics Pages: 8
D+H IM 44-K/M Original Instructions preview
IM 44-K/M
Brand: D+H Pages: 2
Yolink YS4803-UC User Manual preview
YS4803-UC
Brand: Yolink Pages: 23
Automated Logic UNI/32 Technical Instructions preview
UNI/32
Brand: Automated Logic Pages: 10

Brands by name

Popular brands

Load more brands