2 Parameters
2.2 List of parameters
SINAMICS G120 CU250S-2 Control Units
538
List Manual, 09/2017, A5E33842890
Description:
Sets the scaling for the torque for Ethernet/IP ODVA profile (p8980 = 1).
Value:
123:
32
124:
16
125:
8
126:
4
127:
2
128:
1
129:
0.5
130:
0.25
131:
0.125
132:
0.0625
133:
0.03125
Dependency:
Refer to: p8980
Note:
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
Description:
Selects the storage medium for access via the USB mass storage.
Value:
1:
Memory card
2:
Flash r/w internal
Note:
A change only becomes effective after a POWER ON.
The parameter is not influenced by setting the factory setting.
Description:
Setting the USB functionality.
Value:
1:
USS commissioning via the virtual COM port
2:
Only memory access
3:
USB commissioning and memory access
Note:
COMM: Commissioning.
A change only becomes effective after a POWER ON.
The parameter is not influenced by setting the factory setting.
p8983
Ethernet/IP ODVA torque scaling / Eth/IP ODVA M scal
CU250S_V_PN
Access level:
3
Calculated:
-
Data type:
Integer16
Can be changed:
T
Scaling:
-
Dyn. index:
-
Unit group:
-
Unit selection:
-
Func. diagram:
-
Min Max
Factory
setting
123 133 128
p8991
USB memory access / USB mem acc
Access level:
3
Calculated:
-
Data type:
Integer16
Can be changed:
T
Scaling:
-
Dyn. index:
-
Unit group:
-
Unit selection:
-
Func. diagram:
-
Min Max
Factory
setting
1 2 1
p8999
USB functionality / USB Fct
Access level:
4
Calculated:
-
Data type:
Integer16
Can be changed:
T
Scaling:
-
Dyn. index:
-
Unit group:
-
Unit selection:
-
Func. diagram:
-
Min Max
Factory
setting
1 3 3