manualshive.com logo in svg

Siemens SINAMICS G120, List Manual

The Siemens SINAMICS G120 is a state-of-the-art drive system aimed at providing seamless motor control across a wide range of industries. To ensure proper installation, users can easily access the comprehensive Hardware Installation Manual, available for free download on our website.

Share
Download
background image

2 Parameters
2.4 BICO parameters (connectors/binectors)

SINAMICS G120 CU250S-2 Control Units

712

 

List Manual, 09/2017, A5E33842890

2.4.2

Connector inputs (CI)

Product: SINAMICS G120S, Version: 4710100, Language: eng, Type: CI

p0480[0...2]

CI: Encoder control word Gn_STW signal source / Enc Gn_STW S_src

p0641[0...n]

CI: Current limit, variable / Curr lim var

p0771[0...1]

CI: CU analog outputs signal source / CU AO S_src

p1042[0...n]

CI: Motorized potentiometer automatic setpoint / Mop auto setpoint

p1044[0...n]

CI: Motorized potentiometer setting value / Mop set val

p1051[0...n]

CI: Speed limit RFG positive direction of rotation / n_limit RFG pos

p1052[0...n]

CI: Speed limit RFG negative direction of rotation / n_limit RFG neg

p1070[0...n]

CI: Main setpoint / Main setpoint

p1071[0...n]

CI: Main setpoint scaling / Main setp scal

p1075[0...n]

CI: Supplementary setp / Suppl setp

p1076[0...n]

CI: Supplementary setpoint scaling / Suppl setp scal

p1085[0...n]

CI: Speed limit in positive direction of rotation / n_limit pos

p1088[0...n]

CI: Speed limit in negative direction of rotation / n_limit neg

p1098[0...n]

CI: Skip speed scaling / n_skip scal

p1106[0...n]

CI: Minimum speed signal source / n_min s_src

p1109[0...n]

CI: Total setpoint / Total setp

p1138[0...n]

CI: Ramp-function generator ramp-up time scaling / RFG t_RU scal

p1139[0...n]

CI: Ramp-function generator ramp-down time scaling / RFG t_RD scal

p1144[0...n]

CI: Ramp-function generator setting value / RFG setting value

p1155[0...n]

CI: Speed controller speed setpoint 1 / n_ctrl n_set 1

p1160[0...n]

CI: Speed controller speed setpoint 2 / n_ctrl n_set 2

p1330[0...n]

CI: U/f control independent voltage setpoint / Uf U_set independ.

p1352[0...n]

CI: Motor holding brake starting frequency signal source / Brake f_start

p1440[0...n]

CI: Speed controller speed actual value / n_ctrl n_act

p1455[0...n]

CI: Speed controller P gain adaptation signal / n_ctr adapt_sig Kp

p1466[0...n]

CI: Speed controller P-gain scaling / n_ctrl Kp scal

p1475[0...n]

CI: Speed controller torque setting value for motor holding brake / n_ctrl M_sv MHB

p1478[0...n]

CI: Speed controller integrator setting value / n_ctr integ_setVal

p1479[0...n]

CI: Speed controller integrator setting value scaling / n_ctrl I_val scal

p1486[0...n]

CI: Droop compensation torque / Droop M_comp

p1503[0...n]

CI: Torque setpoint / M_set

p1511[0...n]

CI: Supplementary torque 1 / M_suppl 1

p1512[0...n]

CI: Supplementary torque 1 scaling / M_suppl 1 scal

p1513[0...n]

CI: Supplementary torque 2 / M_suppl 2

p1522[0...n]

CI: Torque limit upper / M_max upper

p1523[0...n]

CI: Torque limit lower / M_max lower

p1528[0...n]

CI: Torque limit upper scaling / M_max upper scal

p1529[0...n]

CI: Torque limit lower scaling / M_max lower scal

p1552[0...n]

CI: Torque limit upper scaling without offset / M_max up w/o offs

p1554[0...n]

CI: Torque limit lower scaling without offset / M_max low w/o offs

p2016[0...3]

CI: Comm IF USS PZD send word / Comm USS send word

p2045

CI: PB/PN clock synchronous controller sign-of-life signal source / PB/PN ctrSoL s_src

p2051[0...16]

CI: PROFIdrive PZD send word / PZD send word

p2061[0...15]

CI: PROFIBUS PZD send double word / PZD send DW

p2099[0...1]

CI: Connector-binector converter signal source / Con/bin S_src

p2151[0...n]

CI: Speed setpoint for messages/signals / n_set for msg

p2253[0...n]

CI: Technology controller setpoint 1 / Tec_ctrl setp 1

p2254[0...n]

CI: Technology controller setpoint 2 / Tec_ctrl setp 2

p2264[0...n]

CI: Technology controller actual value / Tec_ctrl act val

p2289[0...n]

CI: Technology controller precontrol signal / Tec_ctr prectr_sig

p2296[0...n]

CI: Technology controller output scaling / Tec_ctrl outp scal

p2297[0...n]

CI: Technology controller maximum limit signal source / Tec_ctrMaxLimS_src

p2298[0...n]

CI: Technology controller minimum limit signal source / Tec_ctrl min_l s_s

Summary of Contents for SINAMICS G120









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SINAMICS G120

Nidec Leroy-Somer R180 Installation And Maintenance Manual preview
Leroy-Somer R180
Brand: Nidec Pages: 20
Ebyte E70 Series User Manual preview
E70 Series
Brand: Ebyte Pages: 34
YASKAWA CC-Link Installation Manual preview
CC-Link
Brand: YASKAWA Pages: 61
Daikin Madoka User Manual preview
Madoka
Brand: Daikin Pages: 2
Daikin BRC7E530W8 Operation Manual preview
BRC7E530W8
Brand: Daikin Pages: 12
Daikin BRC1H81K Installation And Operation Manual preview
BRC1H81K
Brand: Daikin Pages: 12
Daikin BRC1H71W Operation Manual preview
BRC1H71W
Brand: Daikin Pages: 46
Daikin BRC1D71 Operation Manual preview
BRC1D71
Brand: Daikin Pages: 21
Daikin BRC1D517 Operation Manual preview
BRC1D517
Brand: Daikin Pages: 20
Fancom 743 Installer Manual preview
743
Brand: Fancom Pages: 31
3M SST Manual preview
SST
Brand: 3M Pages: 90
Madas M16/RM N.C. DN 65 EEX Technical Manual preview
M16/RM N.C. DN 65 EEX
Brand: Madas Pages: 44
Mackie MDR 24/96 User Manual preview
MDR 24/96
Brand: Mackie Pages: 16
TANDBERG MCU Technical Description preview
MCU
Brand: TANDBERG Pages: 47
VAT 264 Series Installation, Operating, & Maintenance Instructions preview
264 Series
Brand: VAT Pages: 26
Watts 009 Series Instruction, Installation, Maintenance And Repair Manual preview
009 Series
Brand: Watts Pages: 24
L-Acoustics LA8 Product Information preview
LA8
Brand: L-Acoustics Pages: 20
Fancom MRK.1 Manual preview
MRK.1
Brand: Fancom Pages: 23

Brands by name

Popular brands

Load more brands