Triggers
R&S
®
RTO6
212
User Manual 1801.6687.02 ─ 05
"Logical
operator"
Defines the logic combination of two sources. The sources are chan-
nel 1/2 and channel 3/4 on the first step, and in the second step the
logical combination resulting from the first step.
●
"AND": logical AND, conjunctive combination
●
"NAND": logical NOT AND
●
"OR": logical OR, disjunctive combination
●
"NOR": logical NOT OR
Remote command:
TRIGger<m>:QUALify<n>:A[:ENABle]
TRIGger<m>:QUALify<n>:AB:LOGic
TRIGger<m>:QUALify<n>:ABCD:LOGic
TRIGger<m>:QUALify<n>:B[:ENABle]
TRIGger<m>:QUALify<n>:C[:ENABle]
TRIGger<m>:QUALify<n>:CD:LOGic
TRIGger<m>:QUALify<n>:D[:ENABle]
Trigger Levels
Define the trigger level for each input channel. For state and pattern trigger, the trigger
level is a decision threshold: If the signal value is higher than the trigger level, the sig-
nal state is high (1 or true for the Boolean logic). Otherwise, the signal state is consid-
ered low (0 or false) if the signal value is below the trigger level.
You can set the trigger levels for all channels to the same value, see
Additional settings: Timing
"Timing" adds time limitation to the pattern condition.
"Off"
No time limitation. The trigger occurs if the pattern condition is fulfil-
led.
"Timeout"
Defines how long the result of the pattern condition must be true or
false.
"Width"
Defines a time range for keeping up the true result of the pattern con-
dition. The range is defined in the same way as for width and interval
triggers, see
Remote command:
TRIGger<m>:PATTern:TIMeout:MODE
TRIGger<m>:PATTern:TIMeout[:TIME]
TRIGger<m>:PATTern:WIDTh:DELTa
TRIGger<m>:PATTern:WIDTh:RANGe
TRIGger<m>:PATTern:WIDTh[:WIDTh]
Trigger types