R&S RTO6, Руководство пользователя

Страница: 1424 / 2677

Remote control commands
R&S
®
RTO6
1424 User Manual 1801.6687.02 ─ 05
See also:
●
TRIGger<m>:HOLDoff:MODE
●
TRIGger<m>:HOLDoff:AUTotime?
on page 1423
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Parameters:
<AutoTimeScaling> Range: 1E-3 to 1000
Increment: 1
*RST:
0.5
Usage: Asynchronous command
24.9.17 Conditioning
TRIGger<m>:LEVel<n>:NOISe[:STATe]
..........................................................................1424
TRIGger<m>:LEVel<n>:NOISe:MODE
........................................................................... 1425
TRIGger<m>:LEVel<n>:NOISe:ABSolute
....................................................................... 1425
TRIGger<m>:LEVel<n>:NOISe:PERDivision
...................................................................1426
TRIGger<m>:LEVel<n>:NOISe:RELative
........................................................................1426
TRIGger<m>:LEVel<n>:NOISe[:STATe] <HysteresisMode>
Selects how the hysteresis is set.
Suffix:
<m>
.
1..3
Irrelevant, omit the suffix.
<n> 1..31
Indicates the trigger source:
1...4 = channel 1 to 4
5 = external trigger input
6...11 = not available
12...27 = R&S
RT-ZVC input channels
28...31 = differential signals Diff1, Diff2 and Common1, Com-
mon2
Parameters:
<HysteresisMode> AUTO | MANual
AUTO
This is the recommended mode. The hysteresis is set by the
instrument to reject at least the internal noise of the instrument.
You can define a higher minimum value using
TRIGger<m>:
LEVel<n>:NOISe:ABSolute
.
MANual
The hysteresis is defined directly with
TRIGger<m>:
LEVel<n>:NOISe:ABSolute
.
Trigger