Getting started
R&S
®
RTO6
61
User Manual 1801.6687.02 ─ 05
Minimizes the dialog box to a small box that only contains the last selected function.
Closes the dialog box.
To minimize a dialog
If you want to change only one setting during analysis, and you need to change it
often, you can display a small box that only contains the required setting.
1. Open the dialog.
2. Tap the setting that you need to modify.
3. Tap the "Minimize" icon in the upper right corner of the dialog box.
The dialog box turns into a small box that contains only the setting, that was last
selected.
4. To restore the complete dialog box, tap the "Maximize" icon in the small box.
3.3.9
Entering data
To set parameter values and enter other data, you use the various knobs and the on-
screen keypad or keyboard.
Using scale, position and level knobs
The instrument has dedicated rotary knobs to set vertical and horizontal positions and
scales, and the trigger level. When you turn a knob, the input box opens in the upper
right corner of the screen, showing the parameter name and current value.
1. Turn the knob to change the value.
2. Press the knob:
● [Scale]: toggles the increment.
● [Position]: sets to zero.
● [Level]: sets the trigger level to 50% of the signal.
3. The input box also has settings:
● Tap the "Steps" icon to toggle the increment.
● Tap the "Reset" icon to set the parameter to the autoset value (if available).
Operating the instrument
