R&S RTO6, Руководство пользователя

Страница: 1876 / 2677

Remote control commands
R&S
®
RTO6
1876 User Manual 1801.6687.02 ─ 05
Parameters:
<DataPosition> Range: 0 to 255
Increment: 1
*RST:
0
TRIGger<m>:FLXRay:DPTO <DataPositionTo>
Defines the last byte of interest, if the position operator
TRIGger<m>:FLXRay:
DPOPerator
defines a range.
Parameters:
<DataPositionTo> Range: 0 to 255
Increment: 1
*RST:
0
TRIGger<m>:FLXRay:DCONdition <DataOperator>
Sets the operator to set a specific data pattern or a data pattern range.
Parameters:
<DataOperator> OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan |
GETHan | INRange | OORange
OFF = ANY
The data position is not relevant for the trigger condition.
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one data posi-
tion to be set with
TRIGger<m>:FLXRay:DMIN
.
INRange | OORange
In range, Out of range: Set the minimum and maximum value of
the range with
TRIGger<m>:FLXRay:DMIN
and
TRIGger<m>:
FLXRay:DMAX
.
*RST: EQUal
TRIGger<m>:FLXRay:DMIN <DataPattern>
Specifies a data pattern, or sets the the start value of a data pattern range.
Parameters:
<DataPattern> Numeric or string pattern, see Chapter 24.4.6, "Bit pattern
parameter" , on page 1286. The string parameter accepts the bit
value X (don't care).
TRIGger<m>:FLXRay:DMAX <DataPatternTo>
Sets the the end value of an data range if the operator
TRIGger<m>:FLXRay:
DCONdition
is set to INRange or OORange.
Protocols