R&S RTO6, Руководство пользователя

Страница: 598 / 2677

Protocol analysis
R&S
®
RTO6
598 User Manual 1801.6687.02 ─ 05
FD bits
For standard settings " CAN FD" and "Any", you can search for CAN FD-specific bits.
For details, see "FD bits" on page 590.
The setting is available in CAN FD option.
Remote command:
SEARch:TRIGger:CAN:FDATa[:FDF]
on page 1825
SEARch:TRIGger:CAN:FDATa:BRS
on page 1825
SEARch:TRIGger:CAN:FDATa:ESI
on page 1825
Data setup: DLC, NDB, Condition, Data min, Data max
The data setup consists of the number of bytes, the condition, and one or two data pat-
terns.
The data setup settings are the same as in the CAN trigger setup, see "Data setup:
DLC, NDB, Transfer, Condition, Data min, Data max" on page 591.
The data condition setting is also used for symbolic signal search, see Chap-
ter 13.7.6.3, "Symbolic search" , on page 602.
Remote command:
SEARch:TRIGger:CAN:DCONdition
on page 1820
SEARch:TRIGger:CAN:DMIN
on page 1821
SEARch:TRIGger:CAN:DMAX
on page 1821
SEARch:TRIGger:CAN:DLCCondition
on page 1821
SEARch:TRIGger:CAN:DLC
on page 1822
SEARch:RESult:CAN:FRAMe<m>:NDBYtes?
on page 1822
Data position
The data position sets the location in the data field where the instrument looks for the
specified data pattern.
The setting is available in CAN FD option.
The position can be defined if the data field of the frame is longer than 8 bytes - if DLC
≥
9.
For details, see "Data position" on page 592.
Remote command:
SEARch:TRIGger:CAN:FDATa:DPOPerator
on page 1822
SEARch:TRIGger:CAN:FDATa:DPOSition
on page 1823
SEARch:TRIGger:CAN:FDATa:DPTO
on page 1823
Error Condition
Selects the error type to be searched for. You can select one or more error types as
search condition.
The error types are the same as in the CAN trigger setup, see "Error conditions"
on page 592.
Remote command:
SEARch:TRIGger:CAN:CRCerror
on page 1824
SEARch:TRIGger:CAN:BITSterror
on page 1824
SEARch:TRIGger:CAN:FORMerror
on page 1824
CAN and CAN FD (option R&S RTO6-K520)