Getting started
R&S
®
RTO6
40
User Manual 1801.6687.02 ─ 05
Press the [Intensity] key and turn the [Multiuse] knob. Press the [Intensity] key again to
toggle between the three settings. The controlled parameter and its value are shown in
the input box in the upper right corner of the screen.
[Cursor]
Starts a cursor measurement: displays vertical and horizontal cursor lines in the active
diagram, and the results of the cursor measurement.
If you press the key while a cursor measurement is enabled, the "Cursors" dialog
opens. The next press closes the dialog.
Cursors are markers which are placed at points of interest on a waveform. The instru-
ment measures the cursor positions and delta values between parallel cursors.
[Measure]
Opens and closes the "Measurements" dialog and the subtab of the last used mea-
surement. In the dialog, you can configure and start automatic measurements.
[History]
Opens and closes the history player. The history shows stored acquisitions that were
acquired before the current one.
The key is illuminated as long as history acquisitions are displayed.
[HD]
Activates the high definition mode and opens the "HD Mode" dialog box.
[Autoset]
The instrument analyzes the enabled channel signals, and adjusts appropriate horizon-
tal, vertical, and trigger settings to display stable waveforms.
[Preset]
Resets the instrument to a predefined state and starts the continuous acquisition. All
measurements, mask tests, zoom, and most individual settings are deleted, and all
channels except for channel 1 are disabled. You can define preset configurations and
save them to a file. The [Preset] key can be configured to set either factory defaults or
a user-defined preset configuration.
Camera
Performs the action that is assigned to the key in "Menu" > "Settings" > "Frontpanel" >
"Hardkeys". By default, the key saves a screenshot of the waveform display.
See also:
Chapter 4.5.1, "Hardkeys: function assignment"
[Touch Lock]
Locks the touchscreen to prevent unintended use. When the touchscreen is off, the
key is illuminated. Press again to unlock the touchscreen.
[Clear]
Deletes all measurement results including long-term measurement and statistics, all
waveforms, and the history.
Instrument tour
