Search functions
R&S
®
RTO6
429
User Manual 1801.6687.02 ─ 05
Slope, Range, Interv. width, ±Delta
Set the interval condition, see:
●
While the interval trigger can only analyze rising or falling edges, searching for a
width is possible for both edges at the same time ("Either").
●
●
●
Remote command:
Level
Sets the voltage level for trigger search. The value is used for all search event types
that require one trigger level. The search trigger level is search-specific, you can define
different levels in different searches for the same event.
Remote command:
11.2.2.8
Slew rate
The slew rate search settings are the same as the slew rate trigger settings. To apply
the trigger settings to search, tap
The slew rate search is not available if the search source is a digital channel.
Search setup
