R&S RTO6, Руководство пользователя

Страница: 964 / 2677

Protocol analysis
R&S
®
RTO6
964 User Manual 1801.6687.02 ─ 05
7. To start searching the acquired waveform for specific events, tap "Enable" in the
search setup dialog:
The R&S RTO6 displays the "Search Results" box that lists the detected events.
For information on how to configure the search results presentation and how to navi-
gate the search results, see also
"To display search zoom windows" on page 442.
13.27 DDR (option R&S RTO6-K91 )
Double Data Rate Type 3 (DDR3) is a type of Synchronous Dynamic Random Access
Memory (SDRAM). With option R&S
RTO6-K91 you can perform the following analysis
on DDR3 data:
●
Decode the signal.
See:
Chapter 13.27.1, "DDR configuration" , on page 964
●
Create and analyze an eye diagram. This helps to separate the read and write
cycle.
●
Together with the R&S ScopeSuite software you can perform a compliance test on
the signal.
For details refer to:
–
"DDR3 Compliance Tests, Test Procedures Manual"
13.27.1 DDR configuration
13.27.1.1 DDR configuration settings
Access: [Bus] > "DDR" > "Setup" tab
Make sure that the tab of the correct serial bus is selected.
DDR (option R&S RTO6-K91 )