R&S RTO6, Руководство пользователя

Страница: 802 / 2677

Protocol analysis
R&S
®
RTO6
802 User Manual 1801.6687.02 ─ 05
Frame check
Sets the specified frame check to be triggered on. The frame check setup consists of
the condition and one or two data patterns.
This field contains a value that is used to check the integrity of the various bits in the
frame fields (excluding the preamble / SFD).
"Condition" Defines the operator to set a specific frame check, e.g. "Equal" or
"Not Equal") or a range.
"Data Min/Data"
Defines the bit pattern of the frame check pattern.
In binary format, use the following characters: 1; 0; or X (do not care).
To enter the pattern in other formats use the bit pattern editor, see
Chapter 13.1.7, "Bit pattern editor" , on page 493.
"Data Max" The second data pattern is required to specify a range with conditions
"In range" and "Out of range".
Remote command:
TRIGger<m>:TBTO:CRC:CONDition
on page 2126
TRIGger<m>:TBTO:CRC:MIN
on page 2127
TRIGger<m>:TBTO:CRC:MAX
on page 2127
Data
Sets the specified data to be triggered on. The data setup consists of the condition and
one or two data patterns.
"Condition" Defines the operator to set a specific data, e.g. "Equal" or "Not
Equal") or a range.
"Data Min/Data"
Defines the bit pattern of the data pattern.
In binary format, use the following characters: 1; 0; or X (do not care).
To enter the pattern in other formats use the bit pattern editor, see
Chapter 13.1.7, "Bit pattern editor" , on page 493.
"Data Max" The second data pattern is required to specify a range with conditions
"In range" and "Out of range".
Remote command:
TRIGger<m>:TBTO:DATA:DCONdition
on page 2128
TRIGger<m>:TBTO:DATA:DMIN
on page 2129
TRIGger<m>:TBTO:DATA:DMAX
on page 2129
Index
Sets the specified value or range within this series of data that is considered for the
analysis. The index setup consists of the condition and one or two index values.
"Condition" Defines the operator to set a specific index, e.g. "Equal" or a range.
"Index Min/Index"
Defines the bit pattern of the index pattern.
In binary format, use the following characters: 1; 0; or X (do not care).
To enter the pattern in other formats use the bit pattern editor, see
Chapter 13.1.7, "Bit pattern editor" , on page 493.
Ethernet 1000BASE-T1 (option R&S RTO6-K560)