Shihlin electric SDP Series, Manual

Page: 531 / 555

518
13.3 Absolute battery specifications
Cautions for use
Carefully read the following safety cautions. Only use the specified batteries to avoid damage
or dangerous conditions.
1. Make sure the installation location is free of vapor, corrosive and inflammable gas.
2. Correctly place the battery into the battery box to avoid short-circuit.
3. Do not short circuit the positive and negative polarity of the battery, and do not install the
battery in reverse direction.
1. Do not place the battery in a high-temperature environment over 100°C (212°F) or fires, as
this may cause a fire or an explosion.
2. The batteries are non-rechargeable. Do not charge the batteries as this may result in an
explosion.
3. Do not directly weld on the surface of the battery.
Battery specifications
Material Lithium-thionyl chloride/inorganic electrolyte battery
Type ER6C
Shihlin model name: SDH-BAT
Standard voltage 3.6 V
Standard capacity 1800 mAh
Continuous discharge current 100 µ A
Dimension(D x H) 14.5 x 51 mm
Weight 15 g
Operating temperature -55˚C~85˚C (-67˚F~185˚F)