Shihlin electric SDP Series, Manual

Page: 326 / 555

313
PC60 ECMN E-Cam: segment number (N):
Indicates that the E-Cam curve is divided into N
segments, and the table includes N+1 data.
N (PC92 - PC59)
PC60 × PC62 2
31
-1
Note: this parameter is only writable when E-Cam
stops (PC66x=0).
Pr 5
5
~
720
N/A
PC61 ECMM E-Cam: cycle number (M):
When source axis receives the pulse number P
from the master axis, E-Cam rotates the M cycles
defined by PC61.
PC60 × PC61 PC62
PC60 × PC62 2
31
-1
Note: this parameter is only writable when E-Cam
stops (PC66x.Bit0=0).
Pr 1
1
~
32767
N/A
PC62 ECMP E-Cam: master axis pulse number (P):
Please refer to PC61.
Note: this parameter can be modified at any time.
But drastic modification may cause sudden
unintended acceleration. Pr 3600
10
~
2
30
-1
N/A
PC63 ECME E-Cam: engaged segment number
Sets the segment number when E-Cam
engages(segment number of outlined table). Pr 0
0
~
719
N/A
PC64 ECAX
(■)
E-Cam: master axis position:
Position counter of the E-Cam master axis.
Note: this parameter is only writable when E-Cam
stops (PC66 x=0).
Pr 0
-2 31 +1
~
2 31 -1
Pulse
unit of
master
axis